4.60465.00 exVAT

FLEXIBLE carbon fibre sheets

Out ultra-thin smooth glossy FLEXIBLE carbon fibre sheets are excellent for veneers and come in two thicknesses 0.25mm and 0.5mm.


SKU JCF025 Category


These smooth glossy FLEXIBLE carbon fibre sheets are manufactured using 100% genuine carbon fibre infused with epoxy resin and come in two different thicknesses including, 0.25 mm and 0.5 mm.

FLEXIBLE 0.25 mm

Our market leading FLEXIBLE 0.25mm is an ultra-thin sheet possessing paper card like stiffness, translating into an ultra flexible thin sheet with the ability to conform to the tightest of curves (~10 mm radii) or tubes as small as 35 mm diameter. These sheets are premium quality and the best available in the market and will not show light through them like the lower quality competitor products that use carbon fibre fabrics which are a lot less than our 245gsm. This flexible sheet will need to be mounted to a rigid backing material and is not recommended for structural applications or wrapping compound curves.


Our FLEXIBLE 0.5 mm thick carbon fibre sheet is created from multiple layers of high quality 2/2 twill 3k weave carbon fibre with an areal density of 245 gsm to create a classic carbon fibre look. Our carbon fibre veneer sheets are 100% pinhole free and are a perfect choice for adhering to a smooth flat surface or a gentle curved surfaces. Our sheet produces a sleek, flawless, sophisticated look with amazing depth that we guarantee you will not find better anywhere else. The sheet possess a mirror like gloss finish on one side and a matt finish on the other to enable optimum bonding. The gloss side of all our carbon fibre sheets are covered in a removable protective film that will help prevent marking/scratching and maintain the glossy surface finish when you’re cutting and finishing the sheet for your application. Note 3M pressure sensitive adhesive is not supplied with this product

Specification Summary:

Carbon fibre 2/2 Twill 245gsm
Mirror gloss finish
Scratch protection film
Multiple uses for road car and motorsport applications

Recommended Applications:

Marine: Cabin interior design, covering vents, hatches etc
Automotive: Interior trim pieces, dashboards.
Consumer: Architectural/structural panel veneers, splashbacks, etc

Dimensions & Tolerances

Thickness: Available in various from 0.25 mm+/-0.05 mm to 0.5 mm+/-0.05 mm

Dimensions: Available in various sizes up to 2440 x 1220 mm +/-2.0 mm.

This sheet is very flexible and will require additional backing support to maintain its shape. For advice on selecting the correct thickness please check out our Thickness Selection Guide.

Quality & Performance Guarantee

Our FLEXIBLE carbon fibre sheets are 100% pinhole free and are a perfect choice for adhering to smooth flat and curved surfaces. Our sheets produce a sleek, flawless, sophisticated look with amazing depth that we guarantee cannot be bettered.

Cutting, Shaping & Finishing

This ultra-thin carbon fibre sheet can be cut with standard tools including scissors, craft knife, guillotine or scalpel where you must always wear appropriate eye protection when cutting. Finally, for more information check out our Composite Cutting & Finishing Guide in our Technical Support pages.

Additional information
Weight N/A
Dimensions N/A
FLEXIBLE Thickness

0.25mm, 0.5mm


100x100mm, A4 (210x297mm), A3 (297x420mm), 1220x200mm, 1220x600mm, 1220x1220mm, 2440x1220mm


There are no reviews yet.

Be the first to review “FLEXIBLE Carbon fibre sheets”