€73.79 – €1,402.20 incVAT

ECONOMY carbon fibre sheet is manufactured using multiple layers of genuine 100% 12k 2×2 carbon fibre twill reinforcements infused with epoxy resin creating a high stiffness, high strength, light weight and aesthetically pleasing material. All ECONOMY carbon fibre sheets have a glass transition temperature of 90oC i.e. maximum use temperature.

For VAT registered businesses please enter your VAT number at the checkout page to remove VAT (23%).

Clear


Share

Our ECONOMY carbon fibre sheet is manufactured using multiple layers of genuine 100% 12k 2×2 twill carbon fibre reinforcements infused with epoxy resin creating a high stiffness, high strength, light weight and aesthetically pleasing material.

The ECONOMY range is our benchmark carbon fibre sheet that possesses the same high strength and stiffness as our STANDARD carbon fibre sheets and are suitable for the same structurally demanding applications. The ECONOMY carbon fibre plate is more notch sensitive than our STANDARD ranging meaning that more edge finishing is required to leave a ‘clean’ edge compared with the STANDARD. We advise that where your application requires lots of internal holes and slots that you opt for our STANDARD range, which utilise 3k 2×2 twill carbon fibre layers resulting in a less notch sensitive material.

The sheet possess a mirror like gloss finish on one side and a texture/matt finish on the other to enable optimum bonding. The gloss side of all our carbon fibre sheets are covered in a removable protective film that will help prevent marking/scratching and maintain the glossy surface finish when you’re cutting and finishing the sheet for your application.

Recommended Applications:
  • Marine: Structural panels, flooring and partitions.
  • Automotive: Race car components and structures; dashes, structural panels, floor/wall panels, chassis parts.
  • Consumer: Architectural structural panels and partitions.
Dimensions & Tolerances

Thickness: 1.2 mm+/-0.15 mm, 2.0 mm+/-0.20 mm, 3.0 mm+/-0.25 mm

Dimensions: up to 2440 x 1220 mm +/-5.0 mm.

Quality & Performance Guarantee

All our carbon fibre sheet, plate and panel products are manufactured under strict controls with complete record of temperature and pressure throughout the entire manufacturing cycle.

All ECONOMY carbon fibre sheets have a glass transition temperature of 90oC i.e. maximum use temperature, where if higher temperature is required please shop for our HI-Temp range.

All of our structural carbon fibre sheets have been tested for mechanical strength and stiffness in accordance with British (BS EN ISO) and American (ASTM) standards.

Cutting, Shaping & Finishing

Carbon fibre laminates can be cut with CNC routers, waterjet and manual methods with appropriate cutting tools. We recommend carbide tools, abrasive type cutters, or diamond coated tools. Our carbon fibre sheets are easily edge sanded by hand or belt sanders allowing you to trim close and sand to final dimensions for a smooth and clean edge.

1.0mm Technical Datasheet

2.0mm Technical Datasheet

3.0mm Technical Datasheet

5.0mm Technical Datasheet

Additional information
Dimensions N/A
Dimensions

1220x200mm, 1220x600mm, 1220x1220mm, 2440x610mm, 2440x1220mm

ECONOMY Thickness

1.2 mm, 2.0 mm, 3.0 mm

Reviews

There are no reviews yet.

Be the first to review “ECONOMY Carbon Fibre Sheet”